JL AUDIO 6 X 9-Inch (150 X 230 Mm) Coaxial Speaker System -C1-690X
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, spacer/adaptor rings are included allowing the C1-690x to be installed in bottom-mount applications.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690x is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not available.
| Continuous Power Handling (RMS) | 60 W |
| Recommended Amplifier Power (RMS) | 10 - 100 W / Ch. |
| System Efficiency | 91.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 39 Hz - 22 KHz ± 3 dB |
| Frame Outer Diameter* (A) | 6.38 x 9.33 in / 162 x 237 mm |
| Grille Tray Outer Diameter (B) | N/A |
| Motor Outer Diameter (C) | 3.54 in / 90 mm |
| Frontal Coaxial Tweeter Protrusion** (D) | 0.41 in / 10 mm |
| Frontal Grille Protrusion (E) | N/A |
| Mounting Hole Diameter (F) | N/A |
| Mounting Depth (G) | 2.75 in / 70 mm |
|
*Does not take into account mounting tabs |
|
✓ Available at our Brookvale workshop
✓ Installed by qualified auto electricians and audio technicians
✓ Over 30 years of combined car audio experience
✓ OEM-grade wiring looms, connectors and installation materials
✓ Warranty-backed workmanship
✓ Suitable for cars, 4WDs, SUVs, utes and commercial vehicles
Whether you're upgrading speakers, adding an amplifier, installing a multimedia system, fitting a dash cam, or improving vehicle security, our experienced installation team can recommend and fit the right solution for your vehicle.
Need installation pricing or advice? Contact our team on 02 993 92977or visit our Brookvale showroom.
Our Northern Beaches team can assist with:
✓ Product recommendations
✓ Vehicle compatibility checks
✓ Installation advice
✓ System upgrade planning
✓ Warranty and support enquiries
Call 02 993 92977, visit our Brookvale showroom, or use our contact form and we'll help you find the right solution for your vehicle.
Thank you for shopping at Audio Emporium. The following are the terms and conditions that constitute our Shipping Policy.
Where We Ship
We ship to all Australian states and territories, including PO Boxes. We do not currently ship outside Australia.
Shipment Processing
We aim to dispatch orders placed before [CUT-OFF TIME] AEST on a business day the same business day, where stock is on hand. Orders placed after the cut-off, on weekends or on public holidays are dispatched the next business day.
If we are experiencing a high volume of orders or if a product needs to be sourced from our distributor, dispatch may take longer. If there is a significant delay, we will contact you by email or phone.
Orders are not dispatched or delivered on weekends or public holidays.
Shipping Rates and Delivery Estimates
We offer free standard shipping on all orders within Australia to most metropolitan addresses. Bulky or heavy items — such as large subwoofers, multiple amplifiers, or full system shipments — may attract an additional freight surcharge, which will be shown at checkout before you confirm your order. Remote and regional addresses may also attract additional freight depending on the courier.
|
Destination |
Estimated delivery |
|---|---|
|
Sydney metro |
1–3 business days |
|
Other capital cities |
2–5 business days |
|
Regional Australia |
3–7 business days |
|
Remote / WA / NT |
5–10 business days |
Estimates are guidelines provided by our courier partners. Delays can occasionally occur and are outside our control.
Carriers
We dispatch via [COURIER PARTNERS]. Carrier selection depends on order size, weight and destination.
Shipment Confirmation and Order Tracking
You will receive a Shipment Confirmation email once your order has been dispatched, containing your tracking number. The tracking number will typically be active within 24 hours.
Shipping to PO Boxes and Parcel Lockers
We can ship to PO Boxes and Australia Post Parcel Lockers, subject to carrier and item size restrictions. Bulky items may not be deliverable to these addresses; if that's the case for your order, we will contact you to arrange an alternative.
Damaged in Transit
If your order arrives damaged, please contact us at [EMAIL] or call [PHONE] within 48 hours of delivery, with photos of the damaged packaging and product. We will work with the courier to file a claim and arrange replacement or refund as appropriate. Please retain all original packaging until the claim is resolved.
Lost Parcels
If your tracking shows the parcel as delivered but you haven't received it, please contact us within 7 days of the delivery date so we can investigate with the courier.
Customs, Duties and Taxes
As we ship within Australia only, no customs duties apply. GST is included in all prices displayed on the site.
Click and Collect
Sydney customers can collect online orders directly from our Northern Beaches showroom by selecting "Click and Collect" at checkout, subject to stock availability. We will email you when your order is ready for collection. Please bring photo ID and a copy of your order confirmation.
Installation Customers
If your order includes installation at our Sydney workshop, products are held at the workshop and not shipped. We will contact you to confirm your installation booking.
Contact
Shipping questions can be sent to info@audioemporium.com.au or call 02 993 92977.
- Fast Dispatch From Sydney
- Authorised Australian Dealer