HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201)
HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201)
HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201)
HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201)
HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201)
HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201)

HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201)

Regular price$629.99
/
Tax included. Shipping calculated at checkout.

The DBA 201 active subwoofer box features a double passive radiator enclosure made with solid MDF and optimized with FEM simulation to ensure superior performance, maximizing the subwoofer output. The massive magnet of the 8-in. driver provides optimal control during the highest cone excursion.

Extra full set of controls to fine-tune the in-car performance

The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping.

Auto turn-on and standby mode

The built-in audio sense circuit allows the DBA 201 to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available.

Size mm (in.) 200 (8)
Power Handling - Continuous W 220
Power Handling - Peak W 440
Impedance Ohm 0.4
Design Active subwoofer box with double passive radiators
Voice Coil Ø 38.6 (1.52) mm (in.)
Frequency Response Hz 32 ÷ 400
Magnet size D x d x h mm (in.) 115 x 47 x 25 (4.5 x 1.8 x 0.98)
Weight of one component kg (lb.) 6.7 (10.54)
Magnet High Density Flux Ferrite
Cone Pressed paper
Voice Coil Type Copper
Operating voltage VDC (Fuse) 6.5 ÷ 18 (15A)
Start - Stop voltage VDC 6
Idling current A (Power OFF) 260 m (1 m)
Consumption @ 14,4 VDC Max musical power A 8.5
Remote IN Turn on VDC (Current) 4 (1 mA)
PRE input signal Turn ON VRMS 10 mV
SPK input DC Turn ON VDC 2
Distortion - THD @ 100 Hz % 0.15
Bandwidth Hz 15 - 150
S/N ratio dBA 100
Output power (RMS) @ 14,4 VDC, 1% THD W 220
PRE input signal VRMS (impedance) 0.2 ÷ 5 (10kΩ)
SPK input signal VRMS (impedance) 1.2 ÷ 30 (6Ω)
LO-PASS Filter @ 24 dB Oct adjustable Hz 50 ÷ 150
Subsonic Filter @ 24 dB Oct Fixed Hz 15
Phase switch 0 / 180°
Bass Boost @45 Hz dB 0 ÷ 6
Sub remote volume control dB 0 ÷ -15 (HRC 01 included)

DBA 201
mm in
A 291 11.46
B 315.5 12.42
C 264 10.39

✓ Available at our Brookvale workshop
✓ Installed by qualified auto electricians and audio technicians
✓ Over 30 years of combined car audio experience
✓ OEM-grade wiring looms, connectors and installation materials
✓ Warranty-backed workmanship
✓ Suitable for cars, 4WDs, SUVs, utes and commercial vehicles

Whether you're upgrading speakers, adding an amplifier, installing a multimedia system, fitting a dash cam, or improving vehicle security, our experienced installation team can recommend and fit the right solution for your vehicle.

Need installation pricing or advice? Contact our team on 02 993 92977or visit our Brookvale showroom.

Our Northern Beaches team can assist with:

✓ Product recommendations
✓ Vehicle compatibility checks
✓ Installation advice
✓ System upgrade planning
✓ Warranty and support enquiries

Call 02 993 92977, visit our Brookvale showroom, or use our contact form and we'll help you find the right solution for your vehicle.

Thank you for shopping at Audio Emporium. The following are the terms and conditions that constitute our Shipping Policy.

Where We Ship

We ship to all Australian states and territories, including PO Boxes. We do not currently ship outside Australia.

Shipment Processing

We aim to dispatch orders placed before [CUT-OFF TIME] AEST on a business day the same business day, where stock is on hand. Orders placed after the cut-off, on weekends or on public holidays are dispatched the next business day.

If we are experiencing a high volume of orders or if a product needs to be sourced from our distributor, dispatch may take longer. If there is a significant delay, we will contact you by email or phone.

Orders are not dispatched or delivered on weekends or public holidays.

Shipping Rates and Delivery Estimates

We offer free standard shipping on all orders within Australia to most metropolitan addresses. Bulky or heavy items — such as large subwoofers, multiple amplifiers, or full system shipments — may attract an additional freight surcharge, which will be shown at checkout before you confirm your order. Remote and regional addresses may also attract additional freight depending on the courier.


Destination

Estimated delivery

Sydney metro

1–3 business days

Other capital cities

2–5 business days

Regional Australia

3–7 business days

Remote / WA / NT

5–10 business days


Estimates are guidelines provided by our courier partners. Delays can occasionally occur and are outside our control.

Carriers

We dispatch via [COURIER PARTNERS]. Carrier selection depends on order size, weight and destination.

Shipment Confirmation and Order Tracking

You will receive a Shipment Confirmation email once your order has been dispatched, containing your tracking number. The tracking number will typically be active within 24 hours.

Shipping to PO Boxes and Parcel Lockers

We can ship to PO Boxes and Australia Post Parcel Lockers, subject to carrier and item size restrictions. Bulky items may not be deliverable to these addresses; if that's the case for your order, we will contact you to arrange an alternative.

Damaged in Transit

If your order arrives damaged, please contact us at [EMAIL] or call [PHONE] within 48 hours of delivery, with photos of the damaged packaging and product. We will work with the courier to file a claim and arrange replacement or refund as appropriate. Please retain all original packaging until the claim is resolved.

Lost Parcels

If your tracking shows the parcel as delivered but you haven't received it, please contact us within 7 days of the delivery date so we can investigate with the courier.

Customs, Duties and Taxes

As we ship within Australia only, no customs duties apply. GST is included in all prices displayed on the site.

Click and Collect

Sydney customers can collect online orders directly from our Northern Beaches showroom by selecting "Click and Collect" at checkout, subject to stock availability. We will email you when your order is ready for collection. Please bring photo ID and a copy of your order confirmation.

Installation Customers

If your order includes installation at our Sydney workshop, products are held at the workshop and not shipped. We will contact you to confirm your installation booking.

Contact

Shipping questions can be sent to info@audioemporium.com.au or call 02 993 92977.

  • Fast Dispatch From Sydney
  • Authorised Australian Dealer

STORE REVIEWS

What customers say about Audio Emporium